Automatic Conveyor Sand Blasting Machine

GET QUOTES

This automatic sand blasting machine mainly consists of machine body, workpiece conveying device, spray gun and swing mechanism, compressed air system, electrical system, cyclone separator and dust collector.

This machine adopts suction sand blasting, that is, the compressed air flows at high speed in the spray gun to produce the ejection effect. The abrasive in the cyclone separator tank is sucked into the spray gun through the hose, and then the compressed air flow is sprayed from the nozzle to the surface of the workpiece at high speed. To achieve the effect of sandblasting.
The sprayed abrasive is returned to the sand collecting bucket for recycling. The dust generated during the blasting is extracted by the dust extraction fan of the dust removal box and separated by the separator. The good abrasive accumulates at the bottom of the separator and is returned to the sand storage device for recycling. The dust is separated in two stages and sucked into the cyclone separator and the dust collecting trolley.

1. This machine can finish the cleaning of forgings, castings, welding parts, heat treatment parts, stamping parts, heavy molds and machined rough surfaces, descaling, residual salts and burrs, and is used for the pretreatment process before spraying and plating.
2. Also used to spray glass beads and strengthen the surface of decorative parts.
3. Suitable for single and small batch production of medium and small parts.
4. Suitable for sandblasting of flat plates, plates, tetragons, profiles and other special-shaped workpieces, such as: flat stainless steel plates, parallel steel plates, glass steel plates, stone, non-stick pans, baking pans, toasters, computer cases, Functional DVD panels, notebooks, computer motherboards, iron soleplates, decorative parts, sign badges, communication equipment, aluminum plates, profiles and other shaped parts.


ModelATS1200 Automatic Conveyor Sand Blasting Machine
Overall machine dimension(mm)
5000mm(L)×1950mm(W)×3300mm(H)
Size of dust collector(mm)
1300mm(L)×1300mm(W)×2500mm(H)
Quantity of spraying gun(pcs)
12pcs
Power supply
380V/415V/440V 50HZ
Dust removal blower(kw)
7.5kw
Separator air volume(m3/min)
10m3/min
Compressed air source(kg/cm2)
2~7bar(kg/cm2) flowrate 10~12m3/min
Noise(dB)
<85dB
Dust emission(mg)
<0.4mg
Work temperature range
-10℃/45℃
Total power(kw)
9.5kw

1. Use V-belt to convey the workpiece, no sand will accumulate. The speed of the belt can be adjusted according to the requirements of the blasting process.
2. The angle of each spray gun can be freely adjusted to realize automatic frequency swing and fixed-point blasting, which has strong flexibility and wide applicability;
3.Adopt advanced upper cyclone separation system configuration, good dust separation effect and high blasting efficiency;
4. PLC advanced electrical control system is adopted, with a high degree of automation, good stability and low failure rate:
5. The nozzle adopts special high-wear-resistant ceramic material with long service life;
6. Independent bag-type dust removal system, with good dust extraction and ventilation effect: (optional: pulse filter dust removal);
7. Abrasive recycling adopts a combination of screw conveying and pneumatic recycling, and the recycling stability is good.

InquiryPlease fill out the form below, we will reply you within 24 hours.

Related Products

ANTAI

Sand Blasting Pot

ANTAI

Automatic Vacuum Recovery Sand Blasting Machine

ANTAI

Sand Blasting Booth

ANTAI

Automatic Conveyor Sand Blasting Machine

ANTAI

Heavy Molds Sand Blasting Machine

ANTAI

Manual Sand Blasting Machine

在线客服